   _____ ___________________     _____    _______      _____   
  /  _  \\______   \_   ___ \   /  _  \   \      \    /  _  \  
 /  /_\  \|       _/    \  \/  /  /_\  \  /   |   \  /  /_\  \ 
/    |    \    |   \     \____/    |    \/    |    \/    |    \
\____|__  /____|_  /\______  /\____|__  /\____|__  /\____|__  /
        \/       \/        \/         \/         \/         \/ 
                                     
Have fun. Please share our work around :)
                                                               
**********\ www.HDfury.com /************


For any issue and for getting the latest firmware first, please join our discord support server : https://discord.gg/yCRdfPw
Go in Arcana2 channel and make sure you read the pinned posts in it, click the PIN icon on the top right near the search bar on desktop, or slide right on mobile.     
Mostly all answers are already published there and will be added to user manual shortly.




 _     _  _____   ______  ______ _______ ______  _______
 |     | |_____] |  ____ |_____/ |_____| |     \ |______
 |_____| |       |_____| |    \_ |     | |_____/ |______


### HOW TO UPGRADE ###

Please refer to usermanual: https://www.hdfury.com/docs/HDfuryArcana2.pdf

1. Copy the arcana-2.bin file on the root of a FAT32 formatted USB stick.
2. Make sure Arcana2 is powered ON and insert the USB stick into the USB update port.
3. Arcana2 will prompt for update, confirm yes by clicking the rotary switch selector.
4. Once completed, Arcana2 will prompt to power cycle the unit.
5. Remove the USB stick and power cycle Arcana2 (remove/reconnect USB power cable)
6. Wait 30sec for the OLED to come back ON. Once completed, cycle infopages to display the FW version info page and confirm it have updated correctly.
7. All Done ! Congratz !

### If you update unit "in-system" with all cables attached, please make an extra power cycle: ###
### 1) after firmware is flashed, unit restarted, wait 30s for OLED to comes back              ###
### 2) make an extra power cycle (or simply disconnect/reconnect a HDMI cord)                  ###
### If you do not update with HDMI cables attached, then above step 2 is not needed.           ###


### Please don't forget that you can EXPORT your Arcana2 configuration to an USB stick via the USB update port for reference or support request. ### 
### Simply attach USB stick to Arcana2 USB update port then go in Arcana2 OLED MENU > FW/RESET > Export Config and Click to save the file.       ###




 _______ _     _ _______ __   _  ______ _______              _____   ______
 |       |_____| |_____| | \  | |  ____ |______      |      |     | |  ____
 |_____  |     | |     | |  \_| |_____| |______      |_____ |_____| |_____|


########> What's new/fixed in 0.25

- Added scaler mode 4k60_444_8_dv_hdr10+ / 4k60_444_8_lldv_hdr10+ / 4k60_444_8_dv / 4k60_444_8_hdr10+.

- Fixed EDID reading issue when switching from a 4-block TX to a 2-block TX.

- Fixed update file reading error.



########> What's new/fixed in 0.24

- Added scaler mode 4k60_444_8_dv for Normal DV



########> What's new/fixed in 0.23

- Added support for the Sink to read 4-blocks EDID and apply them to all EDID settings.

- Added scaler mode upscale/4k120_444_8_lldv/4k120_444_8_hdr.

- Added support Block Map & HF_EEODB.

- Added and fixed some Go232/RS232 commands.

- Fixed application restriction issues.




########> What's new/fixed in 0.22

- Addressed the problem that the image flashes for a moment when the signal from Kaleidscape source device is repeated

- Additional measures for "Addressed the problem that the signal of the HDMI input path could not be locked when switching the input"

- Supported SBTM (Source-Based Tone Mapping) newly supported by HDMI2.1a standard

- Addressed the problem of flickering when a 480p (FRL) signal is input to a specific TV

- Addressed the problem that VRR with large frame rate changes could not be repeated normally

- Supported Colorimetry [ICtCp, SMPTE2113RGB] newly supported by HDMI2.1a standard

- Addressed the problem that 480p input signal cannot be detected when changing to HDMI repeater after outputting REC656 input 480i signal

- Addressed the problem that the output audio setting may not be set correctly when repeating Audio

- Addressed the problem that HDCP authentication becomes NG when input video signal (HDCP1.4) is upscaled to 8K60_YCC420 

- Addressed the problem that the signal may not be locked if the RxPort is switched after the FRL signal is repeated in the Switch+Repeater configuration

- Added support for reading 3-blocks EDID (Base + CTA_extention + DisplayID_extension)

- Addressed the problem that the TV sometimes flashes when the signal of ChromeCast source device is input

- Addressed the problem that ARC audio stops when the player's audio format of HDMI output is changed to DSD

- Addressed an issue where eARC sound may stop when the cable is unplugged and plugged in

- Addressed the problem that a black screen may appear when re-outputting signals such as when connecting and disconnecting downstream HDMI cable

- Addressed the problem that repeater output does not turn TMDS_ON within 5 seconds when switching to repeater output immediately after signal generator output

- Addressed the problem that downstream HDCP certification may become 1.4 when when the refresh rate of 4K HDR video is switched to 50Hz<->60Hz with Google Chromecast Ultra

- Addressed the problem that downstream HDCP authentication may become 1.4 when the refresh rate is switched to 50Hz<->60Hz in smartphone Google Home application

- Addresses an issue where restarting the HDMI source device may stop outputting audio




########> What's new/fixed in 0.20

1. LLDV Max LUMINANCE value fixed

2. LLDV Min LUMINANCE value thumbwheel value 0-10 use increment of 1 and then above 10 it is default 5

3. Corrected FRLTMDS typo in RS232 commands



########> What's new/fixed in 0.19

1. First Release Version








 ****************************************************
 __  __   ____        ___                             
/\ \/\ \ /\  _`\    /'___\                           
\ \ \_\ \\ \ \/\ \ /\ \__/  __  __   _ __   __  __   
 \ \  _  \\ \ \ \ \\ \ ,__\/\ \/\ \ /\`'__\/\ \/\ \  
  \ \ \ \ \\ \ \_\ \\ \ \_/\ \ \_\ \\ \ \/ \ \ \_\ \ 
   \ \_\ \_\\ \____/ \ \_\  \ \____/ \ \_\  \/`____ \
    \/_/\/_/ \/___/   \/_/   \/___/   \/_/   `/___/> \
                                                /\___/
                                                \/__/
*****************\ www.HDfury.com /*******************


Need a discount code ? Share a link to us, write a review, 
tell people on any forum how cool we are and you will be rewarded with discount code!
the more you do, bigger will be the discount, do something amazing and get a FREE HDFURY!

